Outstanding results with 1760XW Gloria and new T90 codend

Published by FiskerForum, 05-08-2017 · info@fiskerforum.dk

Hampiðjan technical adviser Sæmundur Árnason has spent three weeks at sea on board Murmansk Trawl Fleet’s catcher-processor Mekhanik Kovtun to keep a close eye on the gear during the trawler’s first trip with a new set of gear for targeting mackerel.

‘We sailed from Rúnavík in the Faroe Islands on the 21st of June find some mackerel in the international zone of the Barents Sea. This time we had on board a Gloria Helix 1760WX self-spreading trawl with 80 metre DynIce sweeplines and a new PE T90 codend. The doors for this trip were a 16 square metre pair of Thyborøn Type 15VFs,’ Sæmundur Árnason said.

‘We were catching mackerel mainly close to the surface using 490 to 550 metres of warp. This warp length gave us a door spread of 260 metres and 170 metres between the wing ends, with a vertical opening of 57 metres. We tried dropping the trawl down to 100 metres to see how it performed and were surprised by the results. The door spread increased to 290 metres and 180 metres between the wing ends, while the vertical opening hardly changed at around 55 metres. Even though the horizontal spread was that large, the trawl kept its shape, as you can see from the pictures,’ he said.

‘During the trip we monitored the progress of the rest of the fleet on the same fishing grounds. Fishing with its Hampiðjan Gloria trawl, we saw that our results were as good as the others fishing around us and often significantly better. With a new pelagic trawl it always takes time to get it matched to the trawl doors, and the crew were quick to get the gear set up. This was no surprise with an experience crew like this,’ he said.

‘In this trip we used a PE T90 codend with DynIce rib lines supplied by Hampiðjan, along with a conventional eight-panel codend that was on the ship’s other trawl. It was clear that the quality of the fish that came out of the T90 codend was much better than when the conventional eight-panel codend was in use, and Mekhanik Kovtun’s production manager was delighted with the quality, with much less damaged or bruised mackerel, which underscores the advantages of the T90 codend.’

Source: Hampiðjan

Do you like the article?
Please like it on Facebook, so your friends have a chance to read it as well.

Holland Fisheries Event 2018
Fiskerforum Media Info
Fiskerforum Media Info
Fiskerforum Media Info
Atlantic Fair 2019 - UK
Fiskerforum.com Media Info
Fibras Industriales S.A.
Quiksling - Water Rescue
Atlantic Fair 2019 - UK
Piet Brouwer elektrotechniek
North Sea Ship Agency
Fiskerforum.com Media Info
Granly Diesel A/S

© 2019 • Fiskerforum • CVR 32663192 • www.fiskerforum.cominfo@fiskerforum.com • Phone +45 9731 1946 privacy policy | disclaimer

FiskerForum is published by Apollomedia